A ThermaSkirt system requires the following:

Necessary Parts

ThermaSkirt heated profile panels – all profiles are available in 1~6m lengths or made-to-measure, and supplied with the appropriate number of fixing brackets, removable top caulking gasket and detachable bottom cable cover.

Please note, ThermaSkirt is the pipe, so no extra pipes need to be inserted inside it.

Feed & Return set – this can be either the ‘onboard’ manual TRV, (Thermostatic Radiator Valve as on a standard radiator) or the Oval to 15mm round connectors if connecting to a remote valve or manifold flow control system.

More than one Feed or return set may be required if a single run is more than 20metres in length depending on room complexity.

For Manifolds and digital Thermostats, please see; Manifold Systems

Corners & Joints – At each corner, internal or external there is an oval connector kit, and a suitable cover to hide the joint.

There are flexible connectors available to cater for non standard angles, or to make connections to other sections of ThermaSkirt of a different size.

Optional additional parts include;

Doorways & Obstructions - There are a variety of solutions for bridging doorways, either under, over, or across and obstructions such as fireplaces and openings to enable a single feed & return set to be utilised.

MDF Skirting – for a seamless look, all ThermaSkirt profiles can be provided in a matching MDF profile, primed ready to paint for unheated sections or areas.

Manifold Systems – if you prefer not to have a mechanical control knob on the skirting, you will need to order manifold & flow controls from this section. Valves and controls are electrically or electronically driven and will usually require additional wiring and space to hide the kit, such as an airing cupboard or ceiling void.